| DEBRIS HOPPER | |
|---|---|
| Capacity | 4.35 cubic yards/ 3.32 cubic meters |
| Construction | Stainless Steel |
| Exterior Finish. | Vinyl Wrap |
| Interior Finish | Stainless Steel |
| Suction Tube Diameter | 10” |
| Suction Tube Material | Replaceable, Polyethylene |
| Engine Shroud (optional) | Stainless Steel |
| Inspection Doors | 1 on each side |
| Inspection Door Opening | 13.7” x 26” |
| Dump Type | Hydraulic |
| Dump Cylinders | 2 @ 4” x 16” |
| Dump Height | 70” |
| Dump Controls | Electric In-cab |
| Separator Screen Construction | 2 pc Stainless Steel |
| Separator Screen Maintenance | Hydraulic assist access door |
| AUXILIARY ENGINE | |
|---|---|
| Type/fuel | 4-cycle / Diesel |
| Make | DEUTZ |
| Model | TCD 2.9 |
| Number of Cylinders | 4 |
| Displacement | 177 cu in/2.9 litres |
| Bore | 3.6 in/ 92 mm |
| Stroke | 4.3 in/110 mm |
| Brake Horsepower | 55.4 BHP/ 70 kW |
| Oil Filter | Spin on |
| Air Filter | 2 pc / Dry type w/ safety element |
| Safety Shutdown | Oil Pressure |
| IMPELLER | |
|---|---|
| Diameter | 30” |
| Type | 10 blade backward inclined high pressure |
| Drive | 4 Groove banded belt |
| Construction | 2 Abrasion resisting grades of keyed welded steel |
| Mounting | 2 Sealed & relubable ball bearings |
| Housing Construction | Welded steel |
| Housing Type | Unobstructed for open airflow |
| Liner | Replaceable corded rubber |
| Liner Bolts | Coated for increased abrasion resistance |
| HYDRAULIC SYSTEM | |
|---|---|
| Pump Type | Fixed displacement gear |
| Drive | Direct |
| Pump Capacity | 5 GPM |
| System Filtration | 6 micron |
| Reservoir Capacity | 13 gallons |
| BACK-UP (OPTIONAL) | |
|---|---|
| Pump Type | 12 volt DC |
| Controls | In cab |
| Purpos | Powers all hydraulic functions without auxiliary engine |
| DUST SUPPRESSION | |
|---|---|
| Water Capacity | 105 gallons |
| Tank Construction | Polyethylene |
| Pump Type | 12 volt, Diaphram |
| Controls | In cab |
| CURB BROOM | |
|---|---|
| Controls | Electric in-cab |
| Diameter | 39” |
| Drive | Direct - Hydraulic motor |
| Tilt | Electric in-cab |
| Suspension | Spring |
| Bristle Type | Vertical digger |
| Bristle Material | Oil tempered steel wire |
| Bristle Length | 26” |
| SWEEPING HEAD | |
|---|---|
| Type | Blast - Suction / Right to Left |
| Towing Type | 2 Trailing arms |
| Suspension | 4 Springs |
| Up Storage | Rubber stops |
| Type | 2 piece |
| Material | Welded steel |
| Pressure Tube | 10” Diameter AR steel |
| Head Width | Standard 82”, Optional 90” |
| Flaps | 3 Total |
| Front | 1/4” x 6.5” non-corded rubber |
| Middle | 3/8” x 6” non-corded rubber |
| Rear | 1/2”x 6” non-corded rubber |
| Skids | Single row |
| Skid Material | Steel with virgin Tungsten Carbide |
| “HEADS UP”’ (Anti-plowing) | Independent hydraulics |
| “HEADS UP” Controls | Electric in-cab |
| PROPULSION ENGINE | |
|---|---|
| Type/Fuel | 4 Cycle / Gas |
| Model | GMPT L96 (Gen IV) V8 Vortec |
| Cylinders | 8 |
| Displacement | 6.0 L / 365 cid |
| Horsepower | 297 hp @ 4,300 rpm |
| Starter | 12v |
| Alternator | 145 amp |
| Battery | 12v - 750 CCA |
| Oil Filter | Spin-on |
| Air Filter | Dry-type |
| BRAKES | |
|---|---|
| Type | Front disc / Rear drum |
| Power | Vacuum/Hydraulic with 4-channel ABS |
| Parking | Mechanical / Trans mounted |
| CAB | |
|---|---|
| Type | Cab over EngineCab over Engine |
| Engine Access | Manual tilt |
| Construction | Steel |
| Air Conditioning | Standard |
| Radio | Standard |
| Windows | Electric |
| Door Locks | Electric |
| Steering | Integral Power |
| WEIGHTS AND DIMENSIONS | |
|---|---|
| Total Empty Weight | 9,900 lbs |
| Chassis Only Curb Weight | 5,326 lbs |
| Wheel Base | 109” |
| Turning Diameter | 33’ 6” |
| Overall Length | 214” |
| Overall Height | 92” |
| Overall Width | 92” |
| Sweeping Width (hood only) | 82” or 90” |
| Sweeping Width (hood and left broom) | 101” |
| Sweeping Width (hood and dual brooms) | 116” |
POLISHED STAINLESS STEEL
This option provides a polished finish to the outside side surfaces of the hopper in place of our standard vinyl wrap over stainless steel. The mirror-like finish of polished stainless steel is easy to maintain and will keep your sweeper looking like new for many years.
FRONT BUMPER SPRAY BAR
For addition dust suppression, the front mounted spray bar provides 7 brass spray nozzles located under the chassis front bumper to wet the entire sweeping surface. Includes separate 12 volt supply pump and in-cab control.
HOPPER SHROUD
Gull-wing style lockable doors are positioned on each side of sweeper giving added protection for auxiliary engine and hydraulic system. Shroud reduces external noise and provides a sleek appearance. Added surface area enables more room for company logos and phone numbers.
HOPPER SHAKER
Vibco 12V hopper shaker / vibrator is mounted on the bottom of debris hopper to assist when dumping sweeper contents. This option is extremely beneficial if sweeping heavy construction material and street sweepings.
HOPPER DRAIN SYSTEM
The hopper drain system enables the liquid contents inside the hopper to be removed so the operator can continue sweeping. Includes a large separator screen to prevent blockage and a drain hose for directing drainage contents.
HEAVY DUTY FRONT BUMPER
Protect your sweeper from shopping carts and other minor obstacles with this heavy-duty steel bumper cover. Bolts in front of existing chassis bumper. A lighted option is also available.
LED ILLUMINATOR BUMPER
Protect your sweeper from shopping carts and other minor obstacles with this heavy-duty steel bumper cover. This bumper provides over 17,000 lumens of LED lighting. Includes amber flashing corner lights and a rear facing light to illuminate the pick-up head area. Bolts in front of existing chassis bumper.
DETAIL HOSE 6 INCH
6 inch diameter X 10 foot length suction hose allows for cleaning remote areas and shallow catch basins. Mounts to hopper inspection door and can be positioned on either side of sweeper. Includes block off plate.
SPARE PARTS PACKAGE
Let us customize a parts package so you have critical wear parts on hand to avoid downtime.
LED AMBER LIGHT BAR – MEDIUM
Super bright Amber warning light to ensure your sweeper is visible when operating day or night. This 27 inch LED Light Bar provides 56 3w MaxGen LEDs with a 100,000 hour lifespan. Capable of 30 available flash patterns.
LED AMBER LIGHT BAR – LARGE
Super bright Amber warning light to ensure your sweeper is visible when operating day or night. This 47 inch LED Light Bar provides 88 3w MaxGen LEDs with a 100,000 hour lifespan. Capable of 33 available flash patterns.
AR SUPERTUBE
The Supertube is constructed out of hardened abrasion resistant steel to give you maximum wear protection when sweeping heavy material like sand and rock. This bolt-on transition tube is a must for street and construction type sweeping. Replaces the standard molded urethane tube.
CUSTOM VINYL WRAP
These large tool boxes provide ample storage space for all your sweeping related necessities. Constructed from welded Aluminum for strength and corrosion resistance. Three lockable sealed doors provide easy access and security. Interior has LED light for night visibility.
AUX 60 GALLON WATER TANK
Provides an additional 60 gallon water tank for a total of 165 gallon system capacity. Tank is constructed from welded stainless steel and is located underneath hopper between chassis frame for proper weight distribution.
DUAL STEERNG
The dual steering option allows the sweeper driver to operate the vehicle from either the left or right side of the vehicle. This option provides the operator better visibility when sweeping curbs and gutters for street sweeping.
related Products
Brochure
https://www.victorysweepers.com/wp-content/uploads/2021/07/Liberty-DF-Brochure-2019.pdfVideo
Request a Quote
Request a Quote
"*" indicates required fields
LIBERTY MARKIII SPECIFICATIONS
