CXG – CAB-MOUNTED PARKING LOT SWEEPERS FOR DAILY USE
Victory’s CXG model is a low-profile parking lot sweeper with a 70-inch dump height that is mounted onto a conventional chassis. The CXG utilizes a gasoline-powered, 24.9 hp Honda auxiliary engine. When coupled with the Victory 8-bladed, backward-inclined, 20- inch diameter blower fan the result is an exceptional capability to perform parking lot sweeping. The CXG is designed to enable the operator to sweep typical debris found in parking lots as well as some heavier rock and sand. Our CXG is typically mounted onto either a Ford F250 or GM 2500 series chassis. Both choices ensure adequate carrying capacity; however, consult with us for other mounting options.
The CXG features a 2.7 cubic-yard debris hopper constructed from non-magnetic 304 stainless steel. Large inspection doors are provided on each side of the hopper as well as a full opening top door that allows easy access when dumping and for cleaning. A 39-inch diameter gutter broom with electric in-cab tilt mounted onto the left side of the sweeper and is standard. The CXG’s full-width blast and suction sweeping head is capable of reverse sweeping and includes Victory’s exclusive HOODS-UP SM feature, which allows the operator to raise the front of the sweeping head to allow efficient pickup of bulk trash, leaves and larger debris. Carbide drag shoes, safety chains and rubber head stops are provided.
The 50-gallon dust control system features a 12- volt diaphragm pump with filter and is outfitted with heavy-duty push lock hoses and brass spray nozzles positioned at the broom, head and inside the hopper. A centrifugal, self-cleaning dust separator is located inside the hopper to remove fine dust particles before they can enter the HARDOX® steel blower fan, which is guaranteed against wear-out for 5 years or 5000 hours.
The CXG’s rubber-lined blower housing features an in-cab leaf and light debris diverter system. The hydraulic system is belt-driven from the auxiliary engine and includes a 10-gallon reservoir with a10-micron spin-on filter, labeled manual override directional valves, pressure ports w/gauge and an optional 12-volt hydraulic backup system. The small central control console has heavy-duty rocker style switches, an hour meter, resettable circuit protection and engine throttle. Heavy-duty, 3 mil vinyl wrap is used on the hopper’s exterior to ensure your sweeper looks good for years.
When you want a low profile parking area sweeper designed for daily use over the course of many years, choose the Victory CXG.
- Brochure
- Video
- Request a Quote
SPECIFICATION
DEBRIS HOPPER | |
---|---|
Capacity | 2.7 cubic yards/ 2.06 cubic meters |
Construction | Stainless Steel |
Exterior Finish | Vinyl Wrap |
Interior Finish | Stainless Steel |
Suction Tube Diameter | 10” |
Suction Tube Material | Replaceable, Polyethylene |
Inspection Doors | 2,(1 on each side) |
Inspection Door Opening | 9.75” x 20” |
Dump Type | Hydraulic |
Dump Cylinders | 2 @ 3” x 10” |
Dump Height | 70” |
Dump Controls | Electric In-cab |
Separator Screen Construction | Stainless Steel |
Separator Screen Maintenance | Hydraulic access door |
AUXILIARY ENGINE | |
---|---|
Type/fuel | 4 Cycle / Gas |
Make | Command PRO by Kohler |
Model | 5434 Air Cooled |
Number of Cylinders | 2 |
Displacement | 896 cc |
Bore | 3.37 in/85.6 mm |
Stroke | 3.07 in/78 mm |
Brake Horsepower | 31 BHP/23 kW |
Oil Filter | Spin on |
Air Filter | 2 pc / Dry type w/ safety element |
Oil Cooler | Included |
IMPELLER | |
---|---|
Diameter | 20” |
Type | 8 blade backward inclined high pressure |
Drive | Multi-groove banded belt |
Construction | 2 Abrasion resisting grades of keyed welded steel |
Mounting | 2 Sealed & relubable ball bearings |
Housing Construction | Welded steel |
Housing Type | Unobstructed for open airflow |
Liner | Replaceable corded rubber |
Liner Bolts | Coated for increased abrasion resistance |
HYDRAULIC SYSTEM | |
---|---|
Pump Type | Fixed displacement gear |
Drive | Belt |
Pump Capacity | 5 GPM |
System Filtration | 6 micron |
Reservoir Capacity | 13 gallons |
Hydraulic Back-up System (optional) | |
Pump Type | 12 volt DC |
Controls | In cab |
Purpose | Powers all hydraulic functions without auxiliary engine |
DUST SUPPRESSION | |
---|---|
Water Capacity | 50 gallons |
Tank Construction | Polyethylene |
Pump Type | 12 volt, Diaphram |
Controls | In cab |
CURB BROOM | |
---|---|
Controls | Electric in-cab |
Diameter | 26” |
Drive | Direct - Hydraulic motor |
Tilt | Adustable |
Suspension | Spring |
Bristle Type | Vertical digger |
Bristle Material | Oil tempered steel wire |
Bristle Length | 26” |
SWEEPING HOOD | |
---|---|
Type | Blast - Suction / Right to Left |
Towing Type | 2 Trailing arms |
Suspension | 4 Springs |
Up Storage | Rubber stops |
Type | 1 piece |
Material | Welded steel |
Pressure Tube | 10” Diameter AR steel |
Suction Tube | 10” Diameter AR steel |
Hood Width | 82” |
Skids | Single row |
Skid Material | Steel with virgin Tungsten Carbide |
CONTROLS | |
---|---|
Type | Electric |
Location | In-cab |
Circuit Breakers | Individually resettable |
Switches | Rocker |
Monitoring | Hour meter |
STANDARD CHASSIS | |
---|---|
Make | Chevrolet |
Model | C2500HD |
Capacity / GVWR | 9,300 lbs |
PROPULSION ENGINE | |
---|---|
Type/Fuel | 4 Cycle / Gas |
Cylinders | 8 |
Displacement | 6.0 L / 365 cid |
Horsepower | 350 hp @ 5400 rpm< |
Starter | 12v |
Alternator | 125 amp |
Oil Filter | Spin-on |
Air Filter | Dry-type |
TRANSMISSION | |
---|---|
Type | Automatic |
Speeds | 6 Forward, 1 Reverse |
ADDITIONAL CHASSIS OPTIONS | |
Make /Model | Dodge / Promaster |
Make /Model | Ford / F250 |
Make /Model | Isuzu / NPR |
Make /Model | others upon approval |
WEIGHTS AND DIMENSIONS | |
---|---|
Total Empty Weight | 9,900 lbs |
Chassis Only Curb Weight | 5,022 lbs |
Wheel Base | 109” |
Turning Diameter (curb to curb) | 33’ 6” |
Overall Length | 214” |
Overall Height | 92” |
Overall Width | 92” |
Sweeping Width (hood only) | 82” or 90” |
Sweeping Width (hood and left broom) | 101” |
Sweeping Width (hood and dual brooms) | 116” |
OPTIONS
Spare Parts Packages
Let us customize a parts package so you have critical wear parts on hand to avoid downtime.
Custom Vinyl Wrap
Let our design experts customize your sweeper with a high-quality graphics package. Choose from standard themes or provide your custom logo and company information.